• ABB DSE201MB16A30 DSE201MB16A30 RCBO

ABB DSE201MB16A30 DSE201MB16A30 RCBO

Model: DSE201MB16A30

  • £75.81 inc VAT

  • £75.81 ex VAT

Please Note
All products purchased are for collection from our store in Gibraltar and do not ship directly to your location.

We ship every Thursday from the UK for delivery to our Gibraltar store and shipments take 10 days from leaving the UK (order cut off is Wednesday at midnight or your order will be on the following week's Thursday shipment).

We will call you once you order has arrived to arrange collection.

In Stock

DSE201 M is a 1P+N residual current circuit breaker with overcurrent protection (RCBO) in one module for the protection against short-circuit currents, overload, earth fault currents, indirect contacts, additional protection against direct contacts (30 mA versions). DSE201 M is equipped with supply neutral wire and functional earth wire.

Technical

  • Standards:
    IEC 61009-1
    IEC 61009-2-2
    BS EN 61009-1
    AS/NZS 61009
  • Type of Residual Current:
    A type
  • Number of Poles:
    1+N
  • Number of Protected Poles:
    1
  • Rated Current (In):
    16 A
  • Rated Residual Current:
    30 mA
  • Rated Voltage (Ur):
    230-240 V AC
  • Rated Insulation Voltage (Ui):
    500 V
  • Overvoltage Category:
    III
  • Pollution Degree:
    2
  • Test Voltage (Ut):
    195 … 264 V
  • Rated Frequency (f):
    50...60 Hz
  • Rated Short-Circuit Capacity (Icn):
    10 kA
  • Rated Ultimate Short-Circuit Breaking Capacity (Icu):
    15 kA
  • Rated Service Short-Circuit Breaking Capacity (Ics):
    7.5 kA
  • Rated Residual Breaking Capacity (IΔm):
    10 kA
  • Primary Rated Impulse Withstand Voltage:
    4 kV
  • Dielectric Test Voltage:
    2.5 kV
  • Tripping Characteristic:
    B
  • Energy Limiting Class:
    3
  • Housing Type:
    Insulation group II, RAL 7035
  • Actuator Type:
    Toggle - Insulation group II, black, sealable in ON-OFF positions
  • Contact Position Indication:
    Red ON / Green OFF
  • Fault Indication:
    Blue window
  • Electrical Endurance:
    10000 cycle
  • Mechanical Endurance (Nendu):
    20000 cycle
  • Degree of Protection:
    Housing IP40
    Terminals IP20
  • Resistance to Shock acc. to IEC 60068-2-27:
    30g / 2 shocks / 13 ms
  • Resistance to Vibrations acc. to IEC 60068-2-6:
    0.35mm or 5g - 20 cycles at 5…150…5 Hz without load
  • Environmental Conditions:
    28 cycles
    with 55 °C / 90-96 %
    and 25 °C / 95-100 %
  • Reference Ambient Air Temperature:
    30 °C
  • Terminal Type:
    Screw Terminals
  • Screw Terminal Type:
    Cage Terminal
  • Connecting Capacity:
    Busbar 10 mm²
    Rigid 35 …35 mm²
    Flexible 25 …25 mm²
  • Tightening Torque:
    Top 1.2 N·m
    Bottom 2.8 N·m
  • Mounting Type:
    on DIN rail EN 60715 (35 mm) by means of fast clip device in consumer unit Type A according to IEC 61439-1&3, BS EN 61439-1&3, in distribution board Type B according to IEC 61439-1&3, BS EN 61439-1&3.
  • Power Supply Connection:
    Bottom
  • Position of Neutral Terminals:
    Right
  • Power Loss:
    2.4 W
  • Accessory Type:
    Auxiliary contact
    Signal contact / auxiliary contact
    Shunt trip
    Undervoltage release
    Overvoltage release
    Auxiliary contact for MCBs bottom fitting
Gorilla Logo
Selectric Logo
Snickers Workwear Logo
wiha Logo
Hamilton Hartland Logo
Ricoman Logo
Harled Logo
Curv Logo
ABB Logo
O'Keeffe Logo